Tabla de contenido
Publicidad
Idiomas disponibles
Idiomas disponibles
MUL-630-V1.0-instr.pdf
Voltage measuring CD (---), Voltage AC (~), Resistance (Ω), Diodes ( ),
Continuity ( ), Capacitance ( ), Frequency (Hz) and duty cycle.
1. Insert the red lead into the terminal and the black HzVΩ into the COM
terminal.
2. Set the rotary switch to the correct measurement.
3. Connect the probe to the object to be measured.
The measurement value will be displayed on the screen.
C
- To test capacitance diodes and rotary switch in the position (capacitance) or
(diodes) and press the FUNCT button until the corresponding icon appears.
M
Y
- To eliminate damage to person or damage to the meter by an electric shock
please do not attempt to measure voltages above 1000 V.
CM
MY
- To eliminate damage to the meter or to the devices under test, disconnect
CY
circuit power and discharge all high-voltage capacitors before testing
resistance, continuity and capacitance.
CMY
K
- To measure high resistance (> 1 M), it is normal that the meter takes several
seconds to stabilize reading.
- If the LCD screen LCD indicates 0L open circuit or resistance measurement
exceeds the capacity of the meter.
31
29/11/16
Operation
16:04
Publicidad
Tabla de contenido
