Wall Mount Instructions - Fanimation The Portbrook FP7948 Serie Manual Del Propietário

Please choose one of two hanger options for your fan
(page 5 or 6):
Mounting Fan On Wall Within 6ft Of Outlet
1. Remove & discard the Cord Retainer from the base.
(Figure 1)
2. Mount Retaining Bracket with two screws provided.
(Figure 2)
3. Locate & mount the Wall Mount Bracket on the wall
within 6 feet (or less) of an outlet. Mount with proper wall
mounting hardware (not supplied). (Figure 3A)
4. Carefully break off the thin area in the lower part of the
base. Route the cord under the base and down the wall to
an outlet. (Figure 3B)
5. Hang the fan by inserting the four hooks through the
holes in the bottom of the base and sliding the fan down
until it is pulled snug-tight against the wall. (Figure 3A)
6. Secure the assembled Retaining Bracket / base with
the 1 inch nail provided. (Figure 4)
7. Remove Lock Screw and Screw Knob before rotating
the fan head back to a desired head angle. Attach both
screws into threaded holes in fan head mount. (Figure 5)
8. Plug cord directly into the socket. (Figure 6)
9. Select the desired airflow, located on fan base by
rotating switch clockwise. (Figure 7)

Wall Mount Instructions

5
Figure 1
Figure 3A
Figure 3B
Lock
Screw
Figure 5
Figure 6
Figure 2
1˝ Nail
Figure 4
Screw
Knob
Figure 7