Publicidad
Idiomas disponibles
Idiomas disponibles
Periodic cleaning of your fan is the only maintenance that
is needed.
When cleaning, use only a soft brush or lint free cloth to
avoid scratching the finish.
Abrasive and/or non-abrasive cleaning agents are not
required and should be avoided to prevent damage to
finish.
1. This product employs overload protection (fuse). A
blown fuse indicates an overload or short-circuit
situation. If the fuse blows, unplug the product from the
outlet. Replace the fuse as per the user servicing
instructions (follow product marking for proper fuse
rating) and check the product. If the replacement fuse
blows, a short-circuit may be present and the product
should be discarded or returned to an authorized
service facility for examination and/or repair.
1. Grasp plug and remove from the receptacle or
other outlet device. Do not unplug by pulling on
cord.
2. Slide open fuse access cover on top of
attachment plug towards blades (Fig. 1).
3. Remove fuse carefully (Fig. 2).
4. Slide closed the fuse access cover on top of
attachment plug.
▲WARNING
Risk of fire. Replace fuse only with 5 Amp, 125 Volt
fuse.
▲WARNING
Risk of fire. Do not replace attachment plug.
Contain a safety device (fuse) that should not be
removed. Discard product if the attachment plug
is damaged.
Maintenance
Safety Instruction About Fuse
How To Replace Fuse
CAUTION
Do not use water when cleaning your fan. It could
damage the motor or the finish and create the possibility
of electrical shock.
2. Do not operate any fan with a damaged cord or plug.
Discard fan or return to an authorized service facility for
examination and/or repair.
3. Do not run cord under carpeting. Do not cover cord
with throw rugs, runners, or similar coverings. Do not
route cord under furniture or appliances. Arrange cord
away from traffic area and where it will not be tripped
over.
6
Figure 1
Figure 2
Publicidad
