Movement EDGE Manual De Montagem página 45

GENERAL MAINTENANCE INFORMATION
UPHOLSTERY:
- To ensure a long life for the upholstery and proper hygiene, clean only with a damp cloth: (water and soap or a neutral detergent) after each workout.
- Avoid using abrasive cleaners or cleaners not intended for use on vinyl.
- Replace damaged upholstery immediately.
- Keep sharp or pointy objects away from upholstered furniture.
STICKERS:
- Inspect and familiarize yourself with all safety warnings or other information for the user as described on each sticker.
NUTS AND BOLTS:
- Periodically check all the nuts and bolts.
If necessary, tighten them, ensuring that all the components are properly seated. MEETING SAFETY REQUIREMENTS
- The nuts and bolts follow standards and tolerances.
ANTI-SLIDE SURFACES:
- These surfaces are designed to provide secure bases and should be replaced if they are worn or become slippery.
LUBRICATION:
1- To clean the shafts, use a dry, clean cloth, removing all the dirt and dust.
2- Then wipe dry and clean with solid petroleum jelly, leaving a thin layer.
3 - Next simulate the exercise movements of the machine 4 times without weights.
4 - Finally, remove excess petroleum jelly with another clean, dry cloth.
Do not attempt to repair your equipment yourself. Follow only the maintenance tasks described in this manual.
If further information is required, contact Brudden/Movement technical assistance or use our website to find the nearest authorized technical assistance.
GENERAL MAINTENANCE INFORMATION
11