Publicidad
Furniture Wall Safety Strap
A
B
MOUNTING
SAFETY WALL
BRACKET
STRAP
4 PCS
2 PCS
TOOLS NECESSARY: RUBBER MALLET AND PHILLIPS SCREWDRIVER ARE NOT INCLUDED.
NOTE: 3/8" DRILL BIT AND ELECTRIC DRILL ARE NOT PROVIDED.
WARNING: WHEN UPRIGHT, IT IS POSSIBLE THAT THE FURNITURE MAY TIP OVER. PLEASE INSTALL THE SAFETY
PLEASE READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THIS PRODUCT AND KEEP THESE
INSTRUCTIONS FOR FUTURE REFERENCE. IF YOU HAVE ANY QUESTIONS, PLEASE CALL OUR CUSTOMER
SERVICE NUMBER: 1-800-295-1980.
Step 1:
ATTACH A MOUNTING BRACKET (A) SECURELY TO THE BACK EDGE OF THE FURNITURE USING THE SHORT SCREW (D), THROUGH THE
SMALLER HOLE
Step 2:
LOCATE THE OTHER MOUNTING BRACKET (A) ON THE WALL OVER A WALL STUD AND 2 INCHES BELOW THE MOUNTING BRACKET
SECURED TO THE BACK OF YOUR UNIT. ATTACH TO THE WALL STUD USING THE LONG SCREW (C) PROVIDED, THROUGH THE SMALLER
HOLE.
PLACE THE FURNITURE INTO POSITION SO BOTH MOUNTING BRACKETS ARE VERTICALLY IN LINE. LACE THE END OF THE SAFETY WALL
Step 3:
STRAP (B) THROUGH THE LARGER HOLE IN EACH MOUNTING BRACKET (A). BRING BOTH ENDS TOGETHER AND SLIDE THE FLAT END
THROUGH THE LOCKING END AND
Step 4:
CONFIRM THAT THE STRAP IS SECURELY LACED AND LOCKED. TO MOVE THE FURNITURE AFTER THE SAFETY WALL STRAP HAS BEEN
INSTALLED, SIMPLY REMOVE THE SCREW FROM THE WALL TO LOOSEN THE SAFETY WALL STRAP.
C
D
LONG SCREW
SHORT SCREW
2 PCS
2 PCS
WALL STRAP BEHIND THE FURNITURE TO ENSURE SAFETY.
Publicidad
