When to change the thread
catcher on the standard floor
brush
(depending on model)
The thread catcher on the floor brush
should be replaced as soon as they
appear worn.
Changing the thread catcher
Some models may include one of the
following floor heads:
Floor brush SBD 350-3 or AIRTEQ
^ Using a knife or similar object, lift the
thread catcher out of the slot by the
red marking on the side a.
^ Insert a new thread catcher into the
slots b.
New thread catcher pads can be
purchased from any authorized
Miele vacuum dealer or Miele.
Maintenance and care
23