Function Setting; Auto-Power Off Function - Gram Precision D1-1000 Manual De Utilización

7. Display will show: yyy, clue to load xxx g poise, this is the two point
calibration, after load the poise, press
"-------"
8. If the calibration procedure is correct, the scale will return automatically to
normal weighing mode.
9. If the loaded poise is low, it will display Err-3 and return to the normal
weighing mode without save the calibration data.
10. During the calibration process, you can press the

FUNCTION SETTING

Under normal weighing mode, press the
choose menu and press

AUTO-POWER OFF FUNCTION

1. Display shows "S-OFF"
2. Press the
3. Display shows "A-X"
4. Press the
0 = Auto-power off disable.
1 = Balance will auto-power off after 1 minute of non use.
3 = Balance will auto-power off after 3 minutes of non use.
5 = Balance will auto-power off after 5 minutes of non use.
10 = Balance will auto-power off after 10 minutes of non use.
15 = Balance will auto-power off after 15 minutes of non use.
30 = Balance will auto-power off after 30 minutes of non use.
.... And so on.
5. Press the
key to enter in selected menu.
key to enter into.
to select the desired mode:
key to confirm and come back to normal weighing mode.
key to confirm, display will view
back to last step.
for 2 seconds, press the to
8