Charging External Devices - Silvercrest SPBH 5.200 A1 Manual De Instrucciones

SilverCrest SPBH 5.200 A1

Charging external devices

 To charge an external device with your power bank, use the
supplied USB charging cable (B) to connect the power bank
to the external device. To do so, insert the Micro USB plug of
the USB charging cable (B) into the Micro USB socket of
your external device and then connect the USB plug into the
USB port (2) of your power bank. If the charging process
doesn't start automatically, press the Mode selection
pushbutton (1) briefly to start the charging process.
Alternatively you can also use the charging cable of the
external device manufacturer (USB connection).
During the charging process, the LEDs (4) inform you about the
state of charge of the power bank. The Mode LED (4) lights
green.
LED indicators (4)
Three LEDs lighting blue
Two LEDs lighting blue
One LED lighting blue
All LEDs off
 You can stop the charging process at any time by
unplugging the USB charging cable (B).
32 - English
State of charge
67 - 100%
34 - 66%
1 - 33%
0%