Cooper Lighting MS188 Manual De Instrucciones página 3

• Keep away from flammable objects. Do not position fixture
within one inch of any combustible materials.
• The bulb and fixture get extremely hot during use.
• Fixture should be installed by a qualified electrician or by persons with experience
in household wiring. The electrical system, and the method of electrically
connecting this fixture to it, must be in accordance with the National Electrical Code
and local building codes.
• Use only with a T-3 300 watt or smaller bulb. Installing a bulb of a higher wattage
could create a fire hazard. Use of a higher wattage bulb will void the warranty.
• Never touch the bulb with your bare hands, as oil from your skin can cause
premature failure. Always handle the bulb with gloves or a soft cloth.
• For maximum bulb life, position fixture so the quartz
halogen bulb remains within 4 degrees of horizontal.
• Disassembly of your fixture will void the warranty.
• For supply connections, use wire rated at least 90° C.
• In the event of glass breakage, the entire lens cover must be
replaced per UL requirements. Contact Customer Service for ordering assistance.
• Your fixture is prewired and preassembled for easy installation.
• This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation. Under Part 15 of the FCC Rules, any changes or
modifications to the motion detector described in this instruction sheet that are not
expressly approved by Cooper Lighting, LLC could void the userʼs authority to
operate the equipment.
Note: This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to Part 15 of the FCC Rules. These limits ar
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no
guarantee that interference will not occur in a particular installation. If this equipment
does cause harmful interference to radio or television reception, which can be
determined by turning the equipment off and on, the user is encouraged to try
to correct the interference by one or more of the following measures:
• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from
that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.
WARNING: FCC Regulations state that any unauthorized changes or
modifications to this equipment not expressly approved by the manu-
facturer could void the user's authorization to operate this equipment.
SAVE THESE INSTRUCTIONS.
Call for customer service and/or missing or damaged parts (800-334-6871)
3
4°