SPECIFICATIONS
HUMIDIFYING MODE: Ultrasonic Cool and Warm Mist
PARTS
Humidity Spout
Lid
Cleaning
Brush
Aromatherapy
Oil Tray
and Pad
Power Plug
REPLACEMENT PARTS
UV-C BULB (3.5W):
Model No. LB1000
www.guardiantechnologies.com
IMPORTANT: To maintain warranty and the performance of the air cleaner,
use Guardian Technologies GENUINE Replacement Parts only.
E-4
To Purchase Contact Customer Service.
TANK CAPACITY: 2 gallons
Water
Tank
Handle
Water
Tank
Base
Control Panel
12H
6H
4H
UV RESET
OFF
UV-C Bulb
Compartment
DIRECTIONS FOR USE
SET UP
Select a firm, level, flat location - at least six inches (15 cm) from any wall or object for proper air flow.
Place the humidifier on a water-resistant surface, as water can damage furniture and some flooring.
Do not place unit directly on carpet, towels, blankets or other absorbent surfaces.
Guardian Technologies will not accept responsibility for damage caused by water spillage.
FILLING -
Make sure unit is unplugged.
1. Separate the tank
from the base of
the unit.
12H
6H
4H
UV RESET
3. Pour cool, clean
water directly into
the tank. Do not
pour anything but
water into the tank.
5. Attach the tank to
the base of the unit
and plug in.
12H
6H
4H
UV RESET
7. Add a few drops of your favorite essential oil to the pad in the tray
(Oil not included).
WARNING: DO NOT add oils or other additives directly into the
water tank. Add only to the pad in the tray. Oils added to the tank
will damage the tank and the whole unit. Any use of such additives
in the tank will void the manufacturers warranty.
Pureguardian essential oils and replacement pads
sold separately at www.guardiantechnologies.com
2. Flip over water
tank and open
the tank lid,
turning to the left.
4. Close the tank
lid, turning it to
the right. It is
important to FIRMLY
secure cap after filling
the tank with water.
6. POWER BUTTON
Before turning on
make sure there
12H
6H
4H
is water in the
UV RESET
unit. Turn the
power dial on.
OFF
E-5