Directions For Use; Control Operation - Guardian Technologies pureguardian H1250 Serie Instrucciones De Uso Y Cuidado

DIRECTIONS FOR USE

SET UP
Select a firm, level, flat location - at least six inches (15 cm) from any wall or object for proper air
flow. Place the humidifier on a water-resistant surface, as water can damage furniture and some
flooring. Do not place unit directly on carpet, towels, blankets or other absorbent surfaces.
Guardian Technologies will not accept responsibility for damage caused by water spillage.
FILLING
Make sure unit is unplugged.
1. Separate the tank from the
base of the unit.
3. Pour cool, clean water directly
into the tank. Do not pour anything
but water into the tank.
6. Power Button
Before turning on make sure there
is water in the unit. Press the
Power button.
E-6
2. Flip over water tank and open the
tank lid, turning it to the left.
4. Close the tank lid, turning it to the right.
It is important to FIRMLY secure cap after
filling the tank with water.
5. Attach tank to base of unit.
%
7. Select Desired Settings
See"Control Operation" section for available
unit functions. Note: When you power "on"
the humidistat reading range is from 15% to
90%. If the room humidity is below 15%, the
display reading will flash.
DIRECTIONS FOR USE
CONTROL PANEL TOUCH FUNCTIONS
Digital Display
LED Indicators
Auto
Power
Night Light Control
Auto Humidistat

CONTROL OPERATION

1. Night Light Control
Press 1 time: Night light ON.
2. Mist Control
To use the humidifier without the humidistat select the desired mist setting.
Press once for LOW. Press twice for MEDIUM.
Mist Control
Timer
+
Adjustable Humidistat
AUTO
-
Press 2 times: Night light OFF.
Press three times for HIGH.
E-7