Step 3: Turning The Power On, And - Sony DEV-30 Manual De Instrucciones

Ocultar thumbs Ver también para DEV-30:
Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

5
When the battery is charged,
disconnect the AC Adaptor
from the DC IN jack of this
product.
Tips
When this product is on, you can check the
approximate amount of remaining battery
power (expected recording and playing time)
with the remaining battery indicator at the
upper right on the screen.
To remove the battery pack
 Turn off this product by pressing the
POWER button (p. 14), then open the
battery/memory card cover (p. 13).
 Slide the battery release lever and
remove the battery.
GB
14
Battery release lever
Step 3: Turning the
power on, and setting
up this product
Notes
If this product is used by more than one person,
adjust the diopter and the width whenever a
different person uses it.
1
Press the POWER button.
This product is turned on.
To turn off the power, press the POWER
button again.
2
Adjust the diopter until you
can see a clear image with each
eye by turning the diopter
adjustment knob.
Eye sensor
Adjust the diopter for each eye separately.
If you bring your eyes close to the
viewfinder, the eye sensor reacts to display
the viewfinder screen.
3
Adjust the width between the left
and right viewfinder to fit your
eyes using the IPD ADJ dial.

Publicidad

Tabla de contenido
loading

Este manual también es adecuado para:

Dev-50Dev-50v

Tabla de contenido