To switch the viewfinder display
between 2D and 3D
Press FINDER 2D/3D to switch the
viewfinder display between 2D and 3D.
At the default setting, images in the
viewfinder are displayed in 3D.
Notes
The recorded image does not change even if you
press the FINDER 2D/3D.
To use this product in dark places
(Hyper Gain)
You can view a subject brightly even in dark
places by increasing the gain.
Select
(MENU) [Camera/Mic]
Manual Settings] [Hyper Gain]
[
[On].
Notes
The image quality deteriorates due to noise
when using [Hyper Gain]. In addition, the color
of the image becomes light.
Tips
It is recommended that you adjust the focus
manually.
If you turn off this product, [Hyper Gain] is
also set to [Off].
Recording
In the default setting, images in the
viewfinder are displayed in 3D (p. 19), but
movies are recorded in 2D.
1
With the power on, press the
MODE button to enter the
desired recording mode.
MODE button
(Movie): When recording a movie
(Photo): When recording a photo
2
Movie recording mode:
Press START/STOP to start
recording.
To stop recording, press START/STOP
again.
Photo shooting mode:
Press PHOTO lightly to adjust the
focus, then press it fully.
GB
1