Mounting Babyseat To Rack Surface - Topeak BabySeat II Guia Del Usuario

Mounting BabySeat To Rack Surface

Mount BabySeat on rack
Hook seat onto front rail of rack. Rotate seat down on
rack surface until snapped into positive engagement.
Install slide lock on rack
Press red button and push
slide lock back into rack.
CAUTION
• If sliding lock fails to slide into rack or if red button does not protrude through the rack surface the
installation is incorrect.
• If your saddle has exposed springs, please cover springs adequately to prevent pinching child passenger.
• Never modify BabySeat or rack from their original specifications.
G
• Do not attach additional luggage to the child carrier. Recommend to carry such loads at the opposite end
of the cycle, e.g. in the case of a rear seat, to use a front luggage carrier.
B
• Ensure that your bike is stable before installing or removing BabySeat.
8
Remove slide lock from storage
position
Click
Press the red button and pull the slide
lock back away from seat.
Make sure positive engagement "click"
is heard and red button is protruding
through hole in rack surface.
Click