Periods At A Standstill - BREMA CB 246 Instrucciones Y Advertencias

We recommend asking one of the Authorized Service Centers for a periodic maintenance contract
which includes:
• cleaning the condenser
• cleaning the filter located on the water supply solenoid valve
• checking the charge of coolant gas
• checking the operating cycle
• sanitizing the appliance
If you do not intend to use the appliance for a certain period of time, proceed as follows:
• switch off the electric power source by means of the switch (7 in Fig. 5), and remove the plug of the
appliance from its socket
• shut off the water supply by turning off the water supply tap (8 in Fig. 5)
• empty the inner basin, removing the flap panel and extracting the ice-cube slide and the overflow pipe
(Fig. 10)
• empty out the pump body blowing compressed air into the pipe that supplies water to the sprayer
bank (Fig. 15)
• clean water supply solenoid valve filter as described in chapter 9.1
• clean air condenser filter (air-cooled models) as described in chapter 9.2

10 PERIODS AT A STANDSTILL

E
E
n
n
g
g
l
l
i
i
s
s
h
h