Clarity XLC3.4+ Guia Del Usuario página 9

XLC7HS
REGISTERING THE XLC7HS
The XLC7HS is compatible with select Clarity products (see page 13 for
compatible products). In order to use the XLC7HS you must register it to a
main unit.
Pull the handset's battery tab located on the bottom of the device, and then
press MENU to start registering or deregistering your handset from your
system.
TO REGISTER AN UNREGISTERED HANDSET
1. Press MENU to enter registration mode. You will see displayed on the
screen, "Handset Needs Registration."
2. Press and hold the FIND key on the main unit's base for five seconds,
until the base visual ringer starts flashing. Release FIND key on the main
unit's base.
3. Press MENU key on the handset.
4. The screen shows "Registering... ", then "Registration Successful"
(accompanied by five quick beeps).
5. Your handset is now registered to your main system. Your screen will
display "Handset X," (where "X" is the number of the actual handset
registered, such as the second or fourth handset, etc.).
You can extend the number of handsets by using additional XLC7HS
handsets (sold separately) - up to 4 handsets (total) can be registered to a
main system.
TO REGISTER YOUR HANDSET AGAIN (or to register to a different main
system)
1. In standby mode, press MENU.
2. Press DOWN arrow five times to advance the row reading "Phone Setup"
to the top of the screen.
3. Press MENU to enter the setup section. The screen displays "Register" on
the screen's top row now.
4. Press MENU to enter the Registration section.
5. Press MENU again to select "Register."
6. Follow the Registration steps listed above.
TO DEREGISTER THE HANDSET
1. See the six steps listed above, then press MENU to select Deregister."
2. Your handset will deregister from your base as soon as you press
MENU. The screen will show "Handset X Deregistered"(again, where
"X" is the number of the handset registered), then "Handset Needs
Registration."
OPERATING INSTRUCTIONS
E
N
G
L
I
S
H
9