Electrical Safety - SATA 51305 Manual Del Uso

9）Drilling attachments on tools should ensure that they are firmly clamped for drilling.
10） Fix the work piece. Fixing the workpiece by using a fixed device or a vise. It will be stronger than holding the workpiece with a hand.
11 ） Do not touch drilling accessories or workpiece immediately after operation. Because they may be extremely hot, which can burn the
skin.
12） Do not use the power line that have been damaged. If the power line broken during broken working, it is forbidden to touch the
damaged power line and plug out power. The damaged power line will increase the user's electric shock.
1
2
3
5
Machine parts:
1 ） Chuck
2） Positive / Invert Button
3） Start and stop switch
4） Lock button
5） Brush

Electrical safety:

This tool uses double insulation, so no ground wire is required. Be sure to check that the power supply voltage matches the
voltage on the nameplate
51305/05158/05159
中文
EN DE RU KO
4
PT JA ES
11