SATA 51305 Manual Del Uso página 9

General Electric Tools Safety Warning:
Read all the warnings and instructions:
Disobey the following warning and instructions will cause electric shock, fire or serious injury
Keep all warnings and instructions for reference.
Workplace Satefy:
1 ）Keep the work site clean and bright.
2）Do not operate electric tools under the explosive environment, such as flammable liquids, gases or dust.
3）Keep children and spectators away then operate electric tools.
Electrical safety:
1 ）The electric tool plug must be matched with the socket. Never to modify the plug. Electric tools that need to be grounded cannot be
switched.
2）Avoid touching the ground surface, such as pipes, heat sinks and fridge and so on.
3）Electric tools cannot be exposed to rain or wet environment.
4）No wires should be abused. Never use electric wires to carry and pull electric power tool or a plug is pulled out. Keep the wire away
from the heat, oil, and sharpness side or moving part.
5）When power tools are used outdoor, apply suitable outdoor external floppy line.
6）If it is unavoidable to operate electric tools in wet environment. The residual current action protector （RCD）should be used.
Personal Safety:
1 ）Be vigilant. When operating electric tools, pay attention to what you do. Operate and keep awake. When you feel tired or have a drug.
Do not operate electric tools when alcohol is reacting.
2）Use the personal protective equipment. Always wear protective goggles and other safety protection equipment, such as proper use
of dust mask and anti slip safety. Shoes, helmet and hearing protection devices can reduce personal injury.
3）Prevent accidental starting. Make sure that the switch is connected to the power supply and / or battery boxes, pick up or carry tools
are in a closed position. Have been connected the switch on the power supply which can lead to dander.
4）Remove all adjusting keys or wrenching before electric tools power on. It can cause personal injury if wrench or key left on electric
tool rotary parts.
5）Don't stretch your hands too long. Always pay attention to the foothold and the balance of the body.
6）Appropriate dress. Don't wear loose clothes or wear ornaments. Let the clothes, gloves, and hair away from the moving parts. Loose
clothes, ornaments or long hair may be involved in moving parts.
7）If a device is provided for connection with chip removal and dust collecting equipment, make sure that they are well connected and
properly used.lt can reduce the danger caused by dust with these devices.
8）Don't take it lightly because frequent use of tools creates familiarity and ignores tool safety guidelines. A careless action can cause
serious injury in an instant.
usage and attention of electric tools:
1 ）Keep the handle and grip surface dry, clean and free from grease. In unexpected circumstances, the slippery handle can not
guarantee the safety of grip and the control of tools.
2）Do not abuse electric tools and use proper electric tools according to their usage.
Choosing the right electric tools will make you work effective and safer.
3）If the switch can't turn on or turn off the power of the tool, you can't use the electric tool. An electric tool that can't be controlled by
a switch, it is dangerous and must be repaired.
51305/05158/05159
中文
EN DE RU KO PT JA ES
9