Dirt Devil Express SD30070 Manual De Usuario página 5

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

CAUTION:
TO REDUCE THE RISK OF DAMAGE:
Avoid picking up hard, sharp objects with this product, as they may cause damage.
Store appropriately indoors in a dry place. Do not expose machine to freezing temperatures.
• Do not use sharp objects to clean out hose as they can cause damage.
WARNING:
(one blade is wider than the other). This plug will fit in a polarized outlet only one way. If the plug
does not fit fully in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to
install the proper outlet. Do not change the plug in any way.
NOTICE
A THERMAL PROTECTOR HAS BEEN DESIGNED INTO YOUR
CLEANER TO PROTECT IT FROM OVERHEATING. WHEN THE
THERMAL PROTECTOR ACTIVATES THE CLEANER WILL
STOP RUNNING.
If this happens proceed as follows:
An auto reset thermal protector has been designed into your cleaner to protect it from overheating. When the
thermal protector activates the cleaner suction motor will stop running.
If the vacuum stops running proceed as follows:
1. Turn cleaner OFF and unplug it from the electrical outlet. IMPORTANT: If left plugged in and turned on, the
cleaner motor may start unexpectedly.
2. Empty dirt cup. Check fullness of bag, change if needed. Empty dirty water tank.
3. Inspect the nozzle inlet, nozzle connector, hose connector, hose, wand, and exhaust filter for any obstructions.
Clear obstructions if present.
4. After the motor cools for 30 minutes, the thermal protector will deactivate and cleaning may continue. Plug the
cleaner back into the electrical outlet.
If the thermal protector continues to activate after following the above steps your cleaner needs
servicing.
If the thermal protector continues to activate after following
the above steps, your cleaner needs servicing.
To reduce the risk of electric shock, this appliance has a polarized plug
5

Publicidad

Tabla de contenido
loading

Tabla de contenido