Victoria Arduino Venus Bar 2 Manual Tecnico. Instalacion, Uso, Mantenimiento página 26

ty of coffee as that programmed.
Besides the 4 dose dispensing possibilities, dis-
pensing can always be stopped at any time by
means of the selected dose button or a special
dose can be dispensed by means of the contin-
uous/stop dispensing button
CLEANING THE BODYWORK
To ensure the machine maintains its character-
istics intact over the years, it must always be
kept perfectly clean.
Do not use detergent products, only a soft and
clean sponge dipped in water.
Any oxidisation of the bodywork is perfectly
normal as this is made from natural brass or
copper (depending on the version).
CLEANING THE UNIT WITH THE AID OF
THE BLIND FILTER
After replacing the normal filter in the filter
24
holder with the blind filter (supplied), insert
two spoons of the specific detergent and then
insert the filter holder in the unit and press the
continuous delivery key (MODEL V) or use the
lever (MODEL S).
.
CLEANING THE FILTER AND FILTER-
HOLDER
Mix two teaspoons of specific detergent in half
a litre of boiling water and soak the filters and
filter-holder in the solution for about half an
hour. Afterwards, rinse well under plenty of
running water.
Always use glass or stainless-steel containers
and keep the handles of the filter-holder out of
the detergent liquids.