Citizen CH-4532 Manual Del Usuario página 16

MEASURING YOUR BLOOD PRESSURE
5
Finishing measurement.
[Manual pressurization]
• If your systolic blood pressure is expected to
exceed 200mmHg, use Manual Pressurization
when taking a measurement.
• Keep "START/STOP" switch held pressed until
the pressure value you want to stop pressurization
is reached (approximately 40mmHg higher
than the Systolic blood pressure). You can stop
pressurization by the unit by releasing the switch at the
aforementioned value is reached.
The upper pressure limit is 280mmHg
AUTOMATIC POWER OFF FEATURE
• After taking the blood pressure measurement, pressing the "START/STOP" switch
will turn the monitor off. However, if you do not press the switch, the monitor's
Auto OFF function will automatically turn the monitor off after 3 minutes.
START/STOP Switch
- Eng 16 -
• Press the "START/STOP" switch to
turn the monitor off.
* When you want to stop measurement,
press the "START/STOP" switch. The
cuff is deflated and measurement
stops.
START/STOP Switch