Start-Up; Outdoor Sensor; Base Station - ADE WS 1600 Guía Rápida

Start-up

Proceed according to the order listed below and
first insert the batteries into the wireless outdoor
sensor.

Outdoor sensor

1. Remove the battery compartment cover on the rear
side of the outdoor sensor by pressing with a little force
on the imprinted arrow. Slide the battery compartment
cover in the direction of the arrow, away from the
outdoor sensor.
2. Insert 2 batteries of type LR03 (AAA)/1.5 V as depicted
on the bottom of the battery compartment. Pay
attention to the correct polarity of the batteries (+/-).
3. Slide the battery compartment cover back into place
on the outdoor sensor.

Base station

You can operate the wireless weather station with the
mains adaptor or with batteries.
If the wireless weather station is connected to a mains
socket, then it operates via mains power, even when the
batteries are inserted in the device. Remove discharged
batteries from the battery compartment, since they can leak.
NOTE on material damage
‚ For operation via mains power, use only the
8
mains adaptor delivered with the weather
station.
Weather Station with Wireless Outdoor Sensor WS 1600