Battery Operation; Starting Signal Reception - ADE WS 1600 Guía Rápida

Current mode
1. Insert the plug of the supplied mains adaptor into the
connection socket of the base station.
2. Plug the mains adaptor into a socket that has a voltage
corresponding to that described under "Technical Data".
3. Wait approx. 30 minutes. The base station requires this
time to collect all weather data and to receive radio
signals from the time signal transmitter.

Battery operation

1. With some force, press on the battery compartment
cover and slide it to the side.
2. Insert 2 batteries of the type LR6 (AA)/1.5 V as depicted
on the bottom of the battery compartment. Pay
attention to the correct polarity (+/-).
3. Then slide the battery compartment cover back into
place.
4. Wait approx. 30 minutes. The base station requires this
time to collect all weather data and to receive radio
signals from the time signal transmitter.

Starting signal reception

As soon as the base station is supplied with current, all
of the indicators on the display will fade in for a brief
moment. Furthermore, the display is briefly lit up and a
beep sounds.
The device then switches to receiving-mode,
during which the number of radio waves indicates
the quality of the reception: The more radio waves
shown on the display, the better is the reception.
Weather Station with Wireless Outdoor Sensor WS 1600
9