Festo 9808NH Breve Descripción página 14

CP-IBL-...
3.3 Connecting the load voltage for valves
PLEASE NOTE
Always supply the valves of the valve terminal with 24 V
load voltage. This voltage should be supplied via the connec-
tions marked "24 V".
Observe section "1. User instructions."
Observe the maximum current consumption of all the outputs
switched at the same time.
Assignment: installation local bus and load voltage connection
Bus IN +
! Bus IN -
" Bus OUT +
Bus OUT -
14
! "
%
$ #
#
$ + 24 V valves
% GND valves
Earth connection
$ #
9808NH