Technical Data; Order Numbers - Brita PURITY 1200 Clean Instrucciones De Sustitución

5 Inserting the filter cartridge
Check the O-ring seal of the new filter cartridge
Note: The cartridge seat has been lubricated with food-safe lubricant at the factory. The PURITY
1200 Clean filter cartridge is identified with a blue sticker, the PURITY 1200 Clean Extra filter cartridge
with a red sticker.
6 Commissioning
Note: A bucket with a minimum capacity of 10 litres is needed for flushing/bleeding.
EN
10 L

7 Technical Data

Operating pressure
Water intake temperature
Ambient temperature for storage/transport

8 Order numbers

PURITY 1200 Clean filter cartridge
PURITY 1200 Clean Extra filter cartridge
8
• Check the connector seat of the filter cartridge O-ring
lid for dirt and damage.
3
• Place new filter cartridge
•
Stand on the kick loops
turning clockwise until the mantle handles
•
Stand on the kick loops
vessel lid on the pressure vessel
3
on the lid handle
14
•
Press the pressure vessel lid
engages .
8
•
Place the bucket under the flush hose and open the flush valve
•
Open the inlet valve
bucket. Flush with at least 10 litres.
•
Close the flush valve
•
Check system for any leaks.
•
Note the next exchange date on the enclosed sticker (PURITY 1200 Clean:
light blue sticker, PURITY 1200 Clean Extra: red sticker) and attach it to the
Service Pass on the pressure vessel
Note: Do not stick over the top sticker with the installation date.
•
Switch the power supply to the appliance on.
for correct seat in the groove, dirt and damage.
2
in the pressure vessel
2
with both feet; lift the pressure vessel
9
with both feet and place the pressure
9
. The positioning of the arrow marking
1
must line up with the "INSERT" groove.
down and turn clockwise until the lock
3
on inlet hose while holding the flush hose in the
6 5
and empty the bucket.
16
.
1
in the pressure vessel
2
.
1
are over the kick loops
11
16
2 bar to max. 6 bar
+4 °C to +60 °C
–20°C to +50°C
Article number
315645
1008197
whole
1
.
9
.