Cooper Lighting MT250 Instrucciones página 2

MT250 325-1526.qxd
Congratulations! You have purchased a Cooper Lighting floodlight kit.
The MT250 is constructed with rugged diecast aluminum and should
provide years of trouble free weatherproof service.
Required for installation (not suppplied)
• Screwdriver
• Weatherproof silicone caulking
• (2) 150 watt (MAX) PAR 38 floodlight bulbs (A)
What's included
• Light fixture (B)
• Coverplate gasket (C)
• Lampholder gaskets (D)
• Wire nuts (E)
• Mounting screws (F)
What to know
PLEASE READ THESE IMPORTANT SAFETY INSTRUCTIONS.
• For outdoor use only.
• cULus Listed for wet location use.
• Fixture must be connected to a 120 volt, 60 Hz power source
(any other connection voids warranty).
• Fixture should be installed by a qualified electrician or by persons with
experience in household wiring. The electrical system, and the method of
electrically connecting this fixture to it, must be in accordance with the
National Electrical Code and local building codes.
• Fixture should be mounted to a grounded junction box marked for use in
wet locations.
• Suitable for wall mount or eave mount only. NOT suitable for ground
mount installation.
• Keep away from flammable objects. Do not position fixture
within one inch of any combustible materials.
• The bulb and fixture get extremely hot during use.
Allow fixture to cool completely before attempting to reposition fixture.
• Always replace bulb with the same wattage or lower wattage than
marked. Installing a bulb of a higher wattage could create a fire hazard.
Use of a higher wattage bulb will void the warranty.
• Your light fixture is prewired for easy installation.
• Disassembly of your fixture will void the warranty
Call for customer service and/or missing or damaged parts (800-334-6871)
3/13/06 2:03 PM Page 2
MT250, CMT250 (Bronze)
MT250W, CMT250W (White)
C
B
E
2
A
D
F