Safety Information - Hydor Slimskim Nano 135.35 Manual Del Usuario

Slimskim Nano 135.35
Dear Customer,
Thank you for choosing this quality product. Please read the following instructions very
carefully for the best understanding of the characteristics of this new, innovative product.
Hydor' s new Slimskim Nano skimmer is equipped with a special adjustable collection cup,
and one pump for both foaming and water supply. It is designed to be easily taken apart
for quick and simple maintenance.
The height regulation of the collection cup can be adjusted by the positioning of the o-
ring. This allows for precise foaming regulation.
attention: Slimskim Nano skimmer is specifically designed for use in aquariums. Please refer to your
dealer for any other application.

safety information

attention: please verify that all components of the skimmer are undamaged before putting it into func-
tion. Before placing hands in the aquarium, always disconnect from mains all electrical devices immersed
in water. Verify that the voltage of the mains supply corresponds to the voltage shown on the unit' s label.
•
The pump is intended for indoor use only in fluid with a temperature of max. 35° C (95° F)
•
DO NOT RUN DRY - Do not connect to electrical supply if pump is not completely immersed in water.
•
Do not connect to electrical supply if pump is missing parts.
•
The cord of this pump cannot be replaced or repaired; in case of damage the entire unit must be substi-
tuted.
•
Do not cut or pull on the electrical cord.
•
Always disconnect from mains gently.
•
Make sure hands are dry before touching and disconnecting any electrical supply.
•
To avoid any danger of shock remember to always keep all connections dry.
•
Verify that the mains are clean and are not humid or encrusted with salty deposits..
•
Please keep these instruction in a safe and dry place.
description
Skimmer body/column
A.
Separation for water intake chamber
B.
Foaming tube
C.
Back panel
D.
Collection cup lid
E.
Collection cup
F.
Foaming chamber
G.
Impeller cover
H.
Motor support
I.
Rotor
L.
Shaft
M.
Air intake chamber
N.
Motor
O.
O-ring
P.
Black air tube
Q.
Magnet + suction cup
R.
Clips
S.
Airflow control
T.
Grid
U.
English 9