Bassinet Assembly; Bassinet Operation - UPPAbaby CRUZ Manual Del Usuario

BASSINET ASSEMBLY
SET-UP THE BASSINET
STEP 1: Remove mattress.
STEP 3: Pull both steel braces firmly into their
respective sockets. Make sure that both braces
are properly locked in place.
STEP 5: Raise bassinet canopy by simultaneously
pressing buttons on both sides and pulling up canopy.
When upright fasten canopy to Velcro straps at top
of liner.
UPPAbaby CRUZ Bassinet Instruction Manual
STEP 2: Fold back liner.
STEP 4: Replace bassinet liner and mattress.
STEP 6: ATTACH BASSINET COVER
STEP 1: Place the closed end of the cover over the
bottom of the bassinet, and pull the cover toward
the top of the bassinet.
STEP 2: Fasten the ends of the bassinet cover to
the outside of the canopy with the Velcro strips.
6
BASSINET OPERATION
ATTACH BASSINET
TO STROLLER
STEP 1: Insert the posts on the sides of bassinet
into the slots on the frame. Push until you hear it
"click" on both sides.
STEP 2: Check carefully that the bassinet is properly
attached to the frame by pulling up on the bassinet
carry handle.
NOTE: Bassinet attaches only in the rear-facing
direction so infant is facing the user.
PROPER USE
OF ACCESSORIES
PROPER INSTALLATION OF BASSINET BUG SHIELD
TO REMOVE BASSINET
STEP 1: Lift rear lever firmly and completely (90˚).
STEP 2: Lift bassinet off of frame using
carrying handle.
NOTE: Bassinet must be removed
from stroller to fold.
COLLAPSING BASSINET
STEP 1: Collapse bassinet canopy by simultaneously
pressing buttons on both sides and pushing back.
STEP 2: Lift fabric liner and mattress out of the
way. Disengage by pulling steel braces from their
respective sockets.
7
ENGLISH