Assemble Nozzle Packet; Floor Cleaning - Kärcher FR 30 Manual De Instrucciones

Assemble nozzle packet

1 O ring
2 Rotation arm
3 Nozzle
4 Union joint
 Inser the O ring in the nut of the rotation
arm.
 Place the nozzle on it.
 Slightly fasten the nozzle with the Union
joint.
Note:
The exit jet must be directed parallel to the
rotation arm.
 Adjust the wrench area of the nozzle
(width 10) so that it is parallel to the ro-
tation arm.
 Tighten the Union joint (width 22) using
a wrench.

Floor cleaning

 Connect the steel pipe of the high pres-
sure cleaner to the FR 30 and tighten it
with wrenches (width 24).
 During breaks in working, tilt the hand
spray gun with spray pipe towards the
front. The appliance is then in its park-
ing position.
– 2
EN 7