Ikegami ISD-A31 Manual De Instrucciones página 11

① Camera fixing screws (base rotation)
These are screws to lock the camera in the desired rotation position. Fix these
screws after setting the viewing position.
② Lens fixing screws (elevation)
These are screws to fix the camera in the desired elevation position. Fix these
screws after setting the viewing position.
③ Camera unit with vari-focal lens and 3 axis adjustable pedestal
④ Monitor output connector (MONI.OUT)
This is an output of video signal for local testing or for monitoring. This is useful
for camera setup and lens adjustment.
⑤ Setup adaptor connector
This is for a setup adaptor while making camera setups and adjustments.
⑥ Power cable
This is a power cable. Non-polarity AC24V (AC 21.6V ~ 26.4V) or DC12V has
to be connected. Check the power voltage from the external power supply before
applying power to the camera.
⑦ Video Output cable (BNC)
This is the output of video signal. Connect this to a monitor or switcher.
⑧ Plinth
⑨ Clear Dome Cover
⑩ Fixing holes (four)
⑪ Setup Adaptor
⑫ - ⑯ Function switches of the camera
Switches for camera setup.
E-7