Ikegami ISD-A31 Manual De Instrucciones página 18

② 1SPOT
Select "ISPOT" and press the "E"
button, and the screen shown at
right appears. Highlight "ADJUST
ZONE" and press the "E" button,
and the BLC compensation
sensing area setting screen
comes up.
Each time the E button is
pressed, the assigned area color
changes in turn Blue, Green and
Red in this order.
• In case of Blue
Using the U, D, L or R button,
t h e f i e l d c a n b e m o v e d
wherever you like.
• In case of Green
Using the U, D, L or R button, the field can be enlarged.
• In case of Red
Using the U, D, L or R button, the field can be reduced.
* To quit the field setting screen, hold down the E button longer than 2
seconds. Once the 1SPOT ZONE screen appears, select RET and press
the E button. The previous menu shows up.
③ 2SPOT
As with the 1SPOT mode, two sensing areas can be preset. Take the same
procedure as for the 1SPOT mode.
④ OFF
The backlight compensation is off.
(3) W. DYNAMIC
The hyper wide dynamic level can be varied with the L and R buttons. The
intermediate level is initially set. In shooting scenes with greatly fluctuating light
quantities, move the marker to the right to get a higher effect. Adjust the marker
while watching an actual scene to have an optimum result.
(4) IRIS LEVEL
This parameter appears when the DC type iris lens is in use. Move the marker
to the right, and the lens opens (Brightness enhanced). Adjust the marker while
watching an actual scene to have an optimum result.
(5) RET
Press the E button to go back to the main menu screen.
１ＳＰＯＴ ＺＯＮＥ
→ＡＤＪＵＳＴ ＺＯＮＥ
ＲＥＴ
ＳＰＯＴ ＺＯＮＥ−１ ＥＮＴ：２ＳＥＣ→ＲＥＴ
E-14