Operating Procedure; User Setup; Names And Functions Of The Setup Adaptor - Ikegami ISD-A31 Manual De Instrucciones

8. Operating Procedure

8-1. User Setup

This dome camera is provided with user setup function for picture quality, sync
system selection and camera ID etc. The setup menu is a tree type on-screen-
display. To make a camera setup procedure, connect the setup adaptor as shown.

8-2. Names and functions of the setup adaptor

E U
R
L
D
* To get into Setup mode, hold E button more than 2 seconds.
The supplied setup adaptor shown has four switches and
indications. This setup adaptor Is attached with setup adaptor
connector onto the camera unit.
(Refer to Drawing No.8-1)
Up switch (U)
Down switch (D)
Right switch (R)
Left switch (L)
Enter switch (E)
E U
R
L
D
To select setup parameters.
To change setup parameters.
To get in or get out to setup mode, and
to enter and execute procedures.
E-10
Setup adaptor