Publicidad
NOTA: Si el emparejamiento se pierde, el altavoz inalámbrico se
apaga después de 90 segundos.
● Use el cable USB suministrado para recargar.
LED De Estado Modo De Funcionamiento.
● Parpadeo azul---BLUETOOTH modo de emparejamiento.
● Azul, conectado a un dispositivo Bluetooth.
● Rojo/azul parpadeo---conectado a un dispositivo Bluetooth. /La batería está baja.
LED De Estado---Modo De Carga
● Rojo parpadeo---La batería se está cargando.
● Rojo---recarga de la batería está completa.
Para información sobre la resolución de problemas, consulte la Guía del Usuario en la página de
detalles de su producto en www.kohler.com.cn.
Operation Instructions
How To Operate The Faucet
Lift the handle gently to turn on the faucet. Turn handle clockwise for cold water, turn counterclockwise
for hot water. Water flows out from spout when faucet diverter is in the normal position and it's diverted
to shower column when the diverter knob is lifted.
Turn the diverter handle right, close to the wall to get the flow from hand shower, and turn it back for the
water to switch to showerhead.
How To Operate The Wireless Speaker
WARNING: Risk of property damage. Do not expose batteries to sunlight, fire, or other forms of
excessive heat.
CAUTION: Risk of product damage. Do not submerge the wireless speaker.
CAUTION: Risk of product damage. The wireless speaker and battery are rated to operate in tem-
peratures up to 140°F(60°C). Do not expose to heat sources or install in any location where the tem-
perature many exceed 140°F(60°C).
● This wireless speaker complies with FCC, IC, SRRC and CE.
● To play your personal music files, you need a wireless BLUETOOTH® device.
● This device is rated to IPX4.
Check local regulations for proper disposal.
The BLUETOOTH
and any use of such marks by Kohler Co. is under license. Other trademarks and trade names are
those of their respective owners.
● Set your music device to a midrange volume before connecting to the wireless speaker.
● Press the power button for 1 second to power the wireless speaker ON or OFF.
● The light will blink blue to indicate pairing mode.
● Pair with your BLUETOOTH
blue when connected.
NOTE: If pairing is lost, the wireless speaker will power OFF after 90 seconds.
●Use the USB cable provided to recharge.
LED Status---Operating Mode
● Blue blinking---BLUETOOTH pairing mode.
● Blue--Connected to a BLUETOOTH device.
● Blue/red blink---Connected to a BLUETOOTH device./Battery is low.
LED Status---Charging Mode
● Red blinking---Battery is charging.
● Red---Battery recharge is complete.
word mark and logos are registered trademarks owned by Bluetooth SIG, Inc.
®
device. If a password is required, enter "0000". The light will turn solid
®
6
1196629-M2-A
Publicidad
