Publicidad
Idiomas disponibles
Idiomas disponibles
6. Measure, mark and drill two 5/16" holes on RH
runner (FIG. 4-1).
NOTE: Insert cap screws through
the inside of the top guide
and runner.
7. Bolt the top runner guide (Kit item) to
runner as shown in FIG. 4-2. Torque
cap screws and nuts to 20 to 28 lb-ft.
8. Repeat steps 6 and 7 to install top
runner guide on the LH runner.
© MAXON Lift Corp. 2017
LIFT CORPORATION Sht. 4 of 18 DSG#
FLAT WASHER
(2 PLACES)
1-1/16"
1/2"
5/16" HOLE
(2 PLACES)
RH RUNNER
MEASURING MOUNTING HOLES
5/16"-18
CAP SCREW
(2 PLACES)
5/16"
TOP RUNNER
GUIDE
INSTALLING GUIDE INSIDE RUNNER
M-17-17
Rev. A Date: 12/20/17
13/16"
FIG. 4-1
FIG. 4-2
5/16"-18
LOCK NUT
(2 PLACES)
5/16"
FLAT WASHER
(2 PLACES)
Publicidad
