Publicidad
Idiomas disponibles
Idiomas disponibles
23. If runner hub bushing interferes
with smooth travel of runners in
the RH and LH columns, grind
off the outboard surface of hub
bushing to 1/16" from outside
surface of the runner (FIG. 9-1).
NOTE: Time to lower platform
may vary for different size
platforms.
24. Raise the platform to bed height
(FIG. 9-2). Then, lower the platform
to the ground (FIG. 9-2). Look for the
following conditions.
• Platform lowers smoothly.
• Platform lowers evenly on both sides
• Platform lowers in 16 to 25 seconds
25. If platform raises and lowers
correctly, reinstall the LH and
RH runner covers (FIG. 9-2).
Torque 6 bolts on each runner
cover to 9-14 lb-ft.
© MAXON Lift Corp. 2017
LIFT CORPORATION Sht. 9 of 18 DSG#
RH RUNNER
OUTSIDE SURFACE
PIN
HUB
BUSHING
(REAR VIEW OF RH RUNNER)
LH RUNNER
COVER
CHECKING CLEARANCE OF RUNNER PADS
WITH PLATFORM BETWEEN BED
HEIGHT & THE GROUND
M-17-17
Rev. A Date: 12/20/17
1/16"
GRINDING HUB
FIG. 9-1
RH RUNNER
COVER
FIG. 9-2
Publicidad
