Mopar 4280189 Manual Del Usuario página 9

40. Remove the 4 screws from the WIN (1).
41. Remove the WIN (1) from the rear of the instrument
panel bringing it through the opening below the steer­
ing column and disconnect the electrical connector (2)
from the WIN. Discard the factory WIN module (1).
42. Connect the electrical connector and remote start an­
tenna harness connector to the WIN supplied in the
kit.
43. Install the WIN into the instrument panel.
44. Install the four screws (1) securing the WIN to the in­
strument panel.
Dec 01, 2009
4280189
9
K6860933