Ion Function; Operating Tips - VALERA 609.30 Instrucciones De Empleo

•Only connect this unit to alternating current and check that the mains supply voltage corresponds
to that indicated on the unit.
•Never immerse this unit in water or other liquids.
•Do not put this unit down where it could fall into water or other liquids.
•Do not try to pull any electrical appliance out when it has fallen into water - disconnect the
plugfrom the power socket immediately.
•Make sure the unit is perfectly dry before using it.
•Do not put the appliance on heat sensitive surfaces during use.
•After use always switch the unit off and remove the plug from the power supply socket. Do not
pullon the wire to remove the plug from the power supply socket. Do not pull the plug out of the
powersupply socket when your hands are wet.
•Always allow the unit to cool before putting it away and never wrap the cord around the unit.
•Check that the cord has not been damaged from time to time.
•Prevent the cord from coming into contact with the metal parts while these are still hot.
•Use this appliance only on dry hair.
•Do not use this unit on wigs that have synthetic hair.
•Do not use your unit if it is not working properly. Do not try to repair this electrical unit yourself,rather
contact an authorized technician.
•The elements used to pack the unit (plastic bags, cardboard box, etc.) must be kept out of reach
ofchildren as they are a potential danger to them.
•This unit must only be used for the purposes for which it is expressly intended. Any other use is tobe
considered improper and therefore dangerous. The manufacturer accepts no responsibility fordamage
caused by improper or erroneous use.
•Do not use hair spray while the unit is running.
•Keep the metal parts clean and free of dust, hair spray, gel, etc.
•To avoid dangerous overheating, it is advisable to unwind the entire length of the cord.
OPERATING INSTRUCTIONS
PARTS
1 Appliance
2 Heat cylinder
3 Heat-insulating tip
Switching the appliance on and off
Switch position
0 = off
1 = on
2 = on + ION function
To turn on the appliance, all you have to do is attach the plug to a socket and select position 1 or 2 on
the switch (fig. 1, ref.4) To turn it off, move the switch to position 0, then unplug the plug.
Important:
never leave the appliance unattended when on.

ION FUNCTION

This appliance has an "ION" function, which can be activated by moving the switch to position 2. The
appliance then produces negative ions.
What are ions?
Ions are electrically charged particles found in nature. Negatively charged ions help to purify the air
by neutralising the positively charged ions that, by contrast, reduce its quality by retaining in the
atmosphere many polluting agents.
An abundance of negatively charged ions can be found after a thunder storm or at the seaside or in
the mountains, close to waterfalls and waterways where the feeling of well-being is due to the
increased presence of pure, natural, revitalizing air.
Improved hydration of hair
Negatively charged ions help to maintain the proper hydration of your hair.
Conditioning effect on the hair
Improved hydration assists with the conditioning of your hair, has a regenerating effect and makes it
softer and easier to comb, with greater volume and shine.
No electrostatic charge or "fly away"
Negatively charged ions help to reduce static electricity, the "fly away" effect and unwanted frizzles.

OPERATING TIPS

• This appliance has been designed to create rapid hairstyling and finishing touches on dry hair.
• Wait for the appliance to reach the set temperature.
• CAUTION: burning hazard. Do not let the appliance come into direct contact with the skin.
4 ON/OFF/ION switch
5 ON Indicator Light
6 ION Indicator Light
5