Cautions On Installation; Installation Height - PRASTEL 2PH150A Manual Del Usuario

2PH150A
3.

CAUTIONS ON INSTALLATION

Remove all obstructions
Avoid strong light from the sun, headlights
(trees, clothes line, etc.)
and direct shining on the
between Transmitter and
Transmitter/Reciver.
Receiver
When strong light stays in optical axis for a
long time, it will hurt the product's life
4. DETECTION RANGE AND WIDTH
The maximum detection range is 300 m indoor and 150 m
outdoor.
The detection width can be calculated with following
formula:
Width (A) = 0.025 x Length (L)
L A
60m 1,5m
100m 2,5m
150m 3,8m
5.

INSTALLATION HEIGHT

To detect the intruder efficiently, the sensor should be
installed within 32"-40" (80-100 cm) height.
6.
ALIGNMENT ANGLE
Both receiver and transmitter can be adjusted
horizontally 180° and vertically ± 10°.
7.
INSTALLATION
The 2PH150A barrier can be easily installed on a pole or on a flat surface
- Remove the cover (fig. 7a)
- Loosen the plate restraining screw (fig. 7b) and remove it by sliding it downwards to the base (fig. 7c).
fig. 7a
ENGLISH
Do not install the unit on
places where it may be
splashed by dirty water or
direct sea spray.
Transmitter
fig. 7b
IS2PH150A_01_07.doc
Do not install the unit on
the unsteady place.
Receiver
Installation range
180°
fig. 7c
±10°
7