Using Your Stroller With The Litemax Infant Car Seat - Evenflo sibby Manual De Instrucciones

USING YOUR STROLLER WITH THE LITEMAX INFANT CAR SEAT

• Only use the Evenflo LiteMax infant car seat with this stroller.
Other infant car seats or carriers are not designed to fit the stroller frame and if used with this stroller may result in
serious injury to your child .
• Before using the LiteMax infant car seat with this stroller, read all the instructions provided with it and keep the
instructions stored properly for future use .
• DO NOT lift stroller by using the LiteMax infant car seat handle when installed on stroller .
• If unable to securely attach LiteMax infant car seat to this stroller, remove the car seat and contact Evenflo
ParentLink at 1-800-233-5921 (USA), 1-937-773-3971 (Canada), or 01-800-706-12-00 (Mexico).
• To avoid serious injury, make sure the LiteMax infant car seat is securely snapped onto the car seat mounts .
• Some LiteMax infant car seats have a blanket/boot option that must be removed for proper attachment to this stroller .
1. Fully recline the stroller seat back (page 6).
2. Make sure the bumper bar is securely latched (page 4).
3. The LiteMax infant car seat
Position infant car seat over the stroller. Touch rear vertical surface
of bumper bar. Lower the infant car seat into the stroller and push down on handle. Infant car seat will click when fully
locked into place.
4. Pull up on the front and back of the LiteMax infant car seat to test that it is properly locked into place.
CHECKLIST FOR PROPER INSTALLATION
• Make sure the LiteMax infant car seat
(facing the parent).
• Make sure the LiteMax infant car seat is securely locked into the car seat
mounts and resting on the bumper bar
D
• Pull up on the front and back of the LiteMax infant car seat to test that it is
properly locked into place.
10
WARNING
MUST be facing the parent when installed.
A
A
CLICK!
is in the rear-facing position
A
.
C
of infant car seat against rear vertical surface
B
C
C