Safety Information; Taking Into Operation - EHEIM Jäger TSRH Serie Manual De Usario

English
Thermostatic aquarium heater
A
perature selector ring
Minimum water level mark
Double suction cup holder
Mains cable

Safety information

Never touch mains plug with wet hands.
Warning:
Before carrying out maintenance work, either
switch off all devices in the aquarium or
disconnect mains plug!
The mains cable
replaced. If it is damaged, the device must
be scrapped!
Only for use in rooms.
Risk of burning:
Never switch device on when it is not in the
aquarium.
Risk of overheating:
Water level must never be below minimum
mark
Max. immersion depth 0.5m

Taking into operation

- Check device for damage.
- Remove transit protection.
- Fix suction cups
holder
- Mount thermostatic heater with double
suction cup holder
fixing it in a place where water flow is brisk
(filter out-lets/vents).
- Plug into mains socket.
C Check that drip loop
Setting temperature
B Turn the temperature selector ring
desired temperature. Monitor the aquarium
water temperature using an accurate thermo-
meter for at least 24 hours and make any
necessary adjustments to compensate for
calibration errors. You should periodically
monitor your aquarium water temperature
with an accurate thermometer.
(„Red light"
Note: The temperature selector ring should
only be used as a guide. Always use an
accurate thermometer for water tempera-
ture measurement.
Ratings (see table)
These are standard ratings are for closed aquariums
with an ambient room temperature of 21°C
and a desired water temperature of up to 26° C.
Three-year warranty
Does not cover breakage or damage to glass,
improper use or improper re-calibration and is voided
if the device is opened.
Release button for adjustment
on the housing.
and clip onto heater
= heater in operation).
Drip loop
of this device cannot be
to double suction cup
vertically in the aquarium,
is in position!

Indicator arrow
2 suction cups
Control light
to the
Tem-