Making The Electrical Connections - HAMPTON BAY Campbell 41350 Guía De Uso Y Mantenimiento

Tabla de contenido

Publicidad

Idiomas disponibles

Idiomas disponibles

Assembly - Hanging the Fan (continued)
5

Making the electrical connections

WARNING: Each wire connector supplied with this fan is
designed to accept up to one 12-gauge house wire and two wires
from the fan. If you have larger than 12-gauge house wiring or
more than one house wire to connect to the fan wiring, consult
an electrician for the proper size wire connectors to use.
CAUTION: If the supply wires are a different color, have this
unit installed by a licensed electrician.
IMPORTANT: Use the plastic wire connectors (CC) supplied with
your fan. Secure the connectors with electrical tape and ensure
there are no loose strands or connections.
NOTE: The fan comes with 54 inch lead wires for use with an
extended ball/downrod assembly. If using the 4.5 inch ball/
downrod assembly (B) provided, you can cut the lead wires to
your desired length (no shorter than 12 inches).
Connect the ground conductor of the 120-Volt supply (this
may be a bare wire or a wire with green colored insulation)
to the green ground lead (II) of the fan using a plastic wire
connector (CC).
Connect the fan motor white wire (LL) to the receiver (K) white
wire (LL) using a plastic wire connector (CC).
Connect the fan motor black wire (KK) to the receiver (K) black
wire (KK) using a plastic wire connector (CC).
Connect the fan motor blue wire (JJ) to the receiver (K) blue
wire (JJ) using a plastic wire connector (CC).
Connect the receiver (K) red wire (OO) to the supply black
(hot) wire (KK) using a plastic wire connector (CC).
Connect the receiver (K) white wire (LL) to the supply white
wire (neutral) (LL) wire using a plastic wire connector (CC).
After connecting the wires, spread them apart so that the
green (II) and white (LL) wires are on one side of the outlet
box (MM) and the black wire (KK) is on the other side.
Turn the plastic wire connectors (CC) upward, and carefully
push the wiring into the outlet box (MM).
A
B
JJ
KK
10
MM
K
LL
LL

Publicidad

Capítulos

Tabla de contenido
loading

Este manual también es adecuado para:

52-bvd

Tabla de contenido