Publicidad
3
CENTER ASSEMBLY TO BASE
1.
Insert fourteen dowels [14] into the twelve holes in the base [04].
2.
Slide the large back panel [08] into the slots at the back of the side panels [01] and [02].
CAUTION:
You will need assistance with this step.
3.
Holding the back panel [08] in place, carefully lower the center assembly and back panel [08] onto the base [04], fi tting the holes of the side panels
onto the dowels [14] in the base [04] and the keys of the side panels
[01] and [02] into the keyholes of the base [04]. The bottom of the
back panel [08] will fi t into the slot in the rear of the base [04].
4.
Turn the key tabs of the locks until they fi t in the slots of the locks
and are fl ush with the surface of the locks. Make sure that the center
assembly is secure on the base [04].
2
[01]
[08]
4
[01]
[14]
[04]
6901-002065 <00>
[03]
CAUTION:
1
[02]
3
[02]
[14]
14
[14]
[04]
[01]
[04]
[03]
[08]
7
Publicidad
