Step 7
Attaching the left side panel
:
1 Align the left side panel (2) with the top and bottom (as shown), making sure the the open side of the left panel
points the same direction as the legs (10), then push the side panel together with the top and bottom.
2 Push hidden cams (A) into the two large holes in the bottom left side of the top (1) and the two large holes in
the bottom left side of the bottom (4), as shown, engaging the cam screws (B) in the side panel with the hidden
cams (A) that you just installed in the top and bottom. Make sure that the arrows on the hidden cams point to
the holes on the outside edges of the top and bottom.
NOTE: Make sure to use hidden cams (A) rather than hidden cams (E).
3 Use a Phillips screwdriver to tighten the four hidden cams in the top and bottom.
You'll need:
12
Phillips screwdriver
A (4)
www.insigniaproducts.com
NS-HWD1761