Insignia NS-HWD1761 Guia Del Usuario página 13

Espresso Wood Finish TV Stand for TVs up to 65"
Step 8 Attaching the right side panel
:
1 Align the right side panel (3) with the top and bottom (as shown), making sure the the open side of the right
panel points the same direction as the legs (10), then push the side panel together with the top and bottom.
2 Push hidden cams (A) into the two large holes in the bottom right side of the top (1) and the two large holes in
the bottom right side of the bottom (4), as shown, engaging the cam screws (B) in the side panel with the
hidden cams (A) that you just installed in the top and bottom. Make sure that the arrows on the hidden cams
point to the holes on the outside edges of the top and bottom.
NOTE: Make sure to use hidden cams (A) rather than hidden cams (E).
3 Use a Phillips screwdriver to tighten the four hidden cams in the top and bottom.
You'll need:
Phillips screwdriver
A (4)
www.insigniaproducts.com
13