Insignia NS-HWD1761 Guia Del Usuario página 8

Step 3 Attaching the partitions to the top
:
1 Align the tops of the left partition (5) and the right partition (6) at 90° angles to the bottom side of the top (1) (as
shown), then push the partitions together with the top.
2 Push two hidden cams (A) into the large holes in the top of the left partition (5) and the right partition (6)
engaging the cam screws. Make sure that the arrows on the hidden cams point to the holes on the top edges of
the partitions.
NOTE: Make sure to use hidden cams (A) rather than hidden cams (E).
3 Use a Phillips screwdriver to tighten the two hidden cams in the left partition (5) and the right partition (6), then
cover the hidden cams with cam covers (K) in the left partition.
You'll need:
8
K (2)
A (4)
www.insigniaproducts.com
Phillips screwdriver
NS-HWD1761