Barbecue Grill - SEVERIN PG 2791 eBBQ Instrucciones De Uso

GB

Barbecue grill

Dear Customer,
Before using the appliance, please read the
following instructions carefully and keep this
manual for future reference. The appliance
must only be used by persons familiar with
these instructions.
General information
The barbecue grills are available in different
confi gurations.
Depending on the model, the grill may be
provided with a wind shield, and the grill rack
with a separate handle.
Assemble the grill according to diagram I.
Grill models with additional base stand:
Assemble the base stand according to the
schematic diagram (II) supplied, and then
place the grill onto the stand. The small feet
under the grill connect with the tops of the
vertical legs of the base stand.
Ensure that the grill and base stand are placed
in a safe and stable position. The power cord
should be routed in such a way that no one is
likely to trip over it.
Important safety instructions
∙ This appliance is designed
for outdoor use only; it
must not be operated
within enclosed spaces.
∙ The equipment should
only be connected to an
earthed socket installed
in accordance with the
regulations. It must be
operated with an additional
earth-leakage circuit-breaker
with a rated tripping current
not exceeding 30mA.
∙ Make sure that the supply
voltage corresponds with the
voltage marked on the rating
label.
∙ The power cord should be
regularly examined for any
signs of damage. In the
event of such damage being
found, the appliance must
no longer be used.
∙ Before cleaning the grill,
ensure it is disconnected
from the power supply and
has completely cooled
down.
∙ To avoid the risk of electric
shock, the heating element
and the power cord must
not be immersed in liquid or
even allowed to come into
contact with it.
9