HAMPTON BAY 59216 Guía De Uso Y Cuidado página 13

Assembly - Attaching the Light Kit
1
Attaching the light kit fitter assembly
CAUTION: To reduce the risk of electric shock, disconnect
the electrical supply circuit to the fan before installing the
light fixture.
NOTE: Notice the location of the fan's slide switch. This is
the switch used to change the fan's directional rotation.
For more information on the operation of this switch, see
Operating Your Fan on page 14.
☐ Remove the three screw (VV) from the light kit fitter assembly
(F) and save them.
☐ Align the three holes in the switch cup below the fan motor
assembly (E) with the three holes in the switch cover of the
light kit fitter assembly clears the reversing switch in the
switch cup.
☐ Connect the wires from the light kit fitter assembly (F) to
wires from the fan motor assembly (E) by connecting the
molded adaptor plugs together. Carefully tuck all wires and
splices into the switch cup.
☐ Position the light kit fitter assembly (F) and re-install the
three screws that were removed in first step to secure the
light kit fitter assembly properly.
2
Installing the bulb and glass bowl
☐ Remove the finial (TT), bottom cover (SS), hex nut and the
rubber washer from the threaded nipple of the light kit
fitter assembly (F).
☐ With power off, install the LED bulb (L) by screwing them
into the light bulb sockets. Position the glass bowl (I) over
the threaded nipple, re-install the rubber wash and hex
nut to secure the glass bowl (I) properly.
☐ Re-install the bottom cover (SS) and finial (TT) over the
threaded nipple and tighten the finial (TT) securely.
☐ Attach the pull chain extension (EE ) provided to the light
pull chain and fan pull chain.
VV
L
13
Please contact 1-855-HD-HAMPTON for further assistance.
E
F
F
EE
I
SS
TT
EE
HAMPTONBAY.COM