Assembly - Hanging the Fan (continued)
3
Making the electrical connections
WARNING: Each wire nut supplied with this fan is designed
to accept up to one 12-gauge house wire and two wires
from the fan. If you have larger than 12-gauge house wiring
or more than one house wire to connect to the fan wiring,
consult an electrician for the proper size wire nuts to use.
WARNING: Remove the rubber motor stops on the bottom
of the fan before installing the blades or testing the
motor.
IMPORTANT: Use the plastic wire connectors (BB) supplied
with your fan. Secure the connectors with electrical tape and
ensure there are no loose strands or connections.
NOTE: The fan comes with 54 in. lead wires for use with
an extended ball/downrod assembly. If using the 6 in. ball/
downrod assembly (B) provided, you can cut the lead wires to
your desired length (no shorter than 12 in.).
☐ The fan comes with 54 in. lead wires for use with an extended
ball/downrod assembly. If using the 6 in. ball/downrod
assembly (B) provided, you can cut the lead wires to your
desired length (no shorter than 12 in.) This will make extra
room in the canopy (C), if you do not wish to cut the wires,
you will need to neatly wrap them.
☐ Connect the fan motor green wires to the household green or
bare wire using a wire connecting nut (BB).
☐ Connect the fan motor white wire to the household white wire
using a wire connecting nut (BB).
☐ Connect the fan motor black and blue wires to the household
black wire using a wire connecting nut (BB).
☐ Secure each wire connecting nut using electrical tape.
☐ Turn the wire connecting nut (BB) upward and push the wiring
into the outlet box.
4
Wrapping the extra wire
NOTE: Follow this step ONLY if you did not cut the extra length
from the wires coming from the ceiling fan.
☐ Gently wrap the excess wire around the mounting bracket (A).
☐ Secure the wires with electrical tape.
Black
Blue & Black
10
Outlet box
in the ceiling RR
Green or bare wire
White
White
Green
BB