Operation; Operating Your Fan - HAMPTON BAY 59216 Guía De Uso Y Cuidado

Assembly - Attaching the Fan without the Light Kit
1
Assembling the fan without the
light kit
☐ Remove the three light kit mounting screws (VV) from the
switch cup cover (WW) of the light kit fitter assembly (F).
☐ In order to use the fan without light kit, remove the
switch cup cover (WW) from the top of the light kit fitter
assembly (F) by removing the center hex (YY) inside the
switch cup cover (WW), and then thread the switch cup
cover (WW) off the threaded nipple on the top of the light
kit fitter assembly (F).
☐ Press the plastic plug (HH) (provided) into the center hole
of the witch cup cover (WW).
☐ Position the switch cup cover (WW) onto the switch cup
below fan motor assembly (E) and re-install the three
light kit mounting screws (VV) that were removed on first
step.
☐ Attach the pull chain extension (EE) provided to the fan pull
chain.

Operation

OPERATING YOUR FAN

Turn on the power and check the operation of the fan. The fan pull
chain controls the fan speed as follows:
1 pull - High, 2 pulls - Medium, 3 pulls - Low, 4 pulls - off
The appropriate speed settings for warm or cool weather depends on
factors such as the room size, ceiling height, and number of fans.
The slide switch (XX) controls the direction of the blades: forward
(switch left) or reverse (switch right).
NOTE: Wait for the fan to stop before reversing the direction of the
blade rotation.
A. Warm weather - (Forward) A downward airflow creates a cooling
effect. This allows you to set your air conditioner on a higher setting
without affecting your comfort.
B. Cool weather - (Reverse) An upward airflow moves warm air off of the
ceiling. This allows you to set your heating unit on a lower setting
without affecting your comfort.
VV
WW
14
YY
WW
F
HH
EE
A. Warm Weather
XX
B. Cool Weather
XX
E