Kickback Information; Saw Chain FIling And FIle Gauges - Husqvarna T536 LiXP Manual De Instrucciones

Furthermore the saw chain Husqvarna H38 is evaluated and listed as a Type C Low Kickback Saw chain according to
the provisions in Z62.3-11.

Kickback information

The guide bar nose radius is determined by either the maximum number of teeth in the nose sprocket or the
corresponding maximum nose radius of a solid bar.
As we are listing the maximum guide bar nose radius, you may use a guide bar with smaller nose radius than in our list.
For guide bars of the same length, all sprocket-nose guide bars of the same pitch and having the same number of
sprocket teeth may be considered to have equivalent kickback energy.
The following cutting attachments are approved for the model Husqvarna T536 LiXP.
Guide bar
Length, inch Pitch, inch
10 3/8
12 3/8
14 3/8
Saw chain filing and file gauges
TECHNICAL DATA
Max. nose
Gauge, inch
radius
0.043 7T
0.043 9T
0.043 9T
Saw chain
Type Drive link count
40
Husqvarna H38 45
52
English – 41